Geomembrane construction specifications, the first use of smaller diameter material leveling sand or clay base surface, and then laying the geomembrane. Geomembrane not stretched too tight quality Geomembrane, both ends of the body part of the earth buried corrugated, and finally in the shop geomembrane about 10cm transition layer with a layer of fine sand or clay. Lined with 20-30cm stone (or precast concrete blocks) for the anti-scour protection layer. Construction, should try to avoid a direct hit in the geomembrane stones, the best side to side laying the construction of the protective layer. Geomembrane connection with the surrounding structures should be used bolts and steel batten anchoring Geomembrane, joints brushing emulsified asphalt (thickness 2mm) bonding, to prevent leakage there. Geomembrane specifications selection and lower cushion flatness, material allows tensile stress, elastic modulus, maximum head and maximum particle size, such as overlay within the scope of the relevant laying Geomembrane Texas, in addition to considering the thickness of the design consists of water pressure outside the strength requirements, the need to consider exposure to bury, climate, life and other application conditions, in accordance with the provisions of existing national standards designed to determine the thickness and the actual thickness. Special Geomembrane, Edison, new materials, Hegang Geomembrane new material provided by the Edison Company. Edison New Materials Co., Ltd. (www.fangshenmo.com) located in Shandong Lingxian west industrial area. Scraps and development in the wave of market economy, the current Edison new material has a high profile at the site of construction materials, enjoys a good reputation. Edison made the whole network of new materials Commercial Union certification, marking our service and management level has reached a new height. Edison new material all the staff willing to work with insight and common development, and create a better future.