Geomembrane using new technology to improve the anti-seepage effect: Geomembrane has excellent impact resistance PE geomembrane customized, so even at -40F temperatures are so low at room temperature. Geomembrane polymer is non-toxic, tasteless, odorless white particles, the melting point of about 110 ℃ -130 ℃, the relative density of 0.918-0.965; has good heat resistance and cold. Good chemical stability, high rigidity and toughness, good mechanical strength, resistance to environmental stress cracking resistance, tear strength and good performance, with increased density, mechanical properties and barrier properties will be increased accordingly, heat, and tensile Strength is also higher; acid, alkali, organic solvents, such as corrosion. Shandong Hongxiang new materials low Geomembrane Geomembrane -HDPE cost-effective use of new technology to improve the anti-seepage effect, but the production process more scientific, speed Jie, so the product cost but lower than traditional waterproof material, the actual calculation general engineering use of HDPE impermeable membrane to cost savings of about 50% non-toxic environmentally friendly - impermeable membrane materials used are non-toxic and environmentally friendly materials HDPE geomembrane, seepage is a common principle of physical changes, does not produce any harmful substances 1. qualified acceptance by the appropriate civil documents before geomembrane. 2. Before cutting geomembrane should accurately measure its relative size Edison PE geomembrane, and then press the actual cutting, generally should not be cut by the icon size, should piecewise number of practical PE geomembrane, a detailed record of the special form on. 3. weld geomembrane should be sought at least, to ensure the quality of the premise, as far as possible to save raw materials. But also easy to ensure quality. 4. geomembrane seams between the membrane lap width is generally not less than 10cm PE geomembrane, usually arranged in a direction parallel to the weld maximum slope, that are arranged in the direction of the gradient. 5. At the corner and deformity usually lots should be to minimize the short length of the seam. In addition to special requirements, the slope is greater than 1: 6 slope within slope from the top or the stress concentration range of 1.5 m area, as no welds. Loudi quality PE Geomembrane PE geomembrane _ _ Shandong Edison Edison new material provided by the Corporation. Edison New Materials Co., Ltd. (www.fangshenmo.com) strong, credible, in Dezhou site construction materials industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Edison new materials into the brilliant and you work for a better future!